Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

TerraTrike Accessory Mount - Boom
$19.95
This handy accessory mount can be installed on the boom of your TerraTrike. Perfect for accessories like headlights, iPod mounts, computers, etc. Compatible with any TerraTrike except the Rover model. - Designed specifically for mounting on the booms of trikes - Simple clamp design for easy installation - Provides room for cycle computers, lights, GoPro, Smartphone, etc.
TerraTrike Accessory Mount - Handlebar
$19.95
This handy accessory mount can be installed in multiple locations on the handle bar of your TerraTrike. Perfect for accessories like computers, bells, horns, etc. Compatible with all TerraTrikes, but best used on the Rover, Rambler, or Sportster models with direct steer handlebars. - Designed specifically for mounting on the handlebars of trikes - Simple clamp design for easy installation - Provides room for cycle computers, lights, GoPro, Smartphone, etc.
TerraTrike Accessory Mount - Rover
$19.95
This accessory mount can be attached to the end of a Rover Boom using the bottle cage mounts to provide a place to attach common bicycle accessories such as a headlight or bike computer. Compatible with Rover model only. - Bolts to the water bottle cage bosses and still allows for use of a bottle cage - Provides room for cycle computers, lights, GoPro, Smartphone, etc.
SRAM eTap Battery
$55.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Profile Design UCM Universal Computer Mount 25mm
$9.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Planet Bike Protege Rear Wheel Bracket - 130cm Wire & Hardware
$59.00
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
Minoura SWG-400 SwingGrip Clamp
$24.99
Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove
K-Edge Garmin Combo Mount
$64.99 - $69.99
Out-front computer mount for Garmin Edge, Forerunner, and Touring cycling computers. This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) 55.4 grams - Weight – (35.0 mm) 60.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 & Fly12CE users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Giant ANT+/BLE 2-in-1 Speed & Cadence Sensor Black
$53.00
GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets
Giant Garmin Computer Mount for Contact SLR Integrated Handlebars
$16.00
Features - Mounts underneath Contact SLR Aero Integrated handlebars - Adjustable length - Alloy construction - Hardware included
Giant Nylon Out-Front GPS Mount For Round Bar Black
$21.00
GNT Nylon Out-Front GPS Mount For Round Bar Black Product description - Giant NeosTrack / Neos GPS computer mount - Durable Nylon construction - Giant GPS puck included - Fits 31.8 / 35mm handle bars
Giant RideSense ANT+/BLE Sensor
$58.00
Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet
Garmin Bike Speed Sensor 2
$39.99
Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.
Garmin Bike Speed Sensor 2 and Cadence Sensor 2 Bundle
$69.99
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Garmin Forerunner 910XT Quick Release Kit
$21.99
Easily transfer your Forerunner 910XT from wrist to handlebar as you go from running to riding. The Quick Release Kit takes just seconds to mount and comes with a quick release bracket, two bike mounts, and two extra pins.
Garmin Out-front Bike Mount
$39.99
Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).
Garmin Silicone Case Edge 520
$9.99
Protect your Edge 520 with these form-fitting, removable silicone cases.
CatEye Cadence Pedal Magnet
$4.00
Cadence Magnet for all CatEye computers that record cadence.
CatEye H-34 Flex-Tight Bracket
$6.00
The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.
CatEye Out Front Bracket
$15.00
CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.
CatEye Universal Wheel Magnet
$3.95
Wheel magnet for all CatEye cycle computers
BiKASE TrailKASE
$29.99
Using super heavy duty rubber, the TrailKASE is designed to conveniently fit any size phone with or without a case on your bicycle while you ride! Using an 1/8 turn (10 o’clock to 12 o’clock), the TrailKASE securely attaches to the handle bar bracket (included). By simply wrapping the rubber case around all 4 corners of your phone, your phone is secure and provides 100% visibility to your screen.
Zipp QuickView Road Low Computer Mount
$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Wahoo Blue SC Speed/Cadence Sensor (BT/ANT+)
$59.99
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Wahoo RPM Speed Sensor (BT/ANT+)
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Topeak BarXtender
$19.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Topeak Mobile PowerPack 6000
$74.95
Redesigned for 2017, the Mobile PowerPack 6000 has even more power and ports to charge up to two devices while on the go. Multiple mounting options and a GoPro mount adapter provide flexibility and convenience. - Battery: 6000 mAh Li-Ion - Burn Time: approx Charge iPhone 2 times - Charge Time: approx 8-10 hr - Output: USB / DC 5V 2A (Total) - Certificate: CE / FCC - Material: Engineering grade plastic - Charge: USB - Mount: Stem or top tube (shim incl.) - Input: USB / DC 5V 1A (Max) - Added Features: Compatible with RideCase Mount Included adapter allows to install on GoPro Mount Dual USB ports 4 LED power gauge Wire collector Auto-off for battery reserve - Size: 9.4 x 5 x 3 cm / 3.7” x 2” x 1.2” - Weight: 160 g / 5.64 oz
Tacx ANT+ Dongle Micro USB
$54.99
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
Tacx Bracket for Tablets
$59.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Page 1 of 5 Next page