Motors

The Bafang G01 geared motor kits are ideal for those who want a small and lightweight geared motor in the lower power 250-500 watt range. They are available for front forks only and still have appreciable torque output for climbing hills. Being a geared kit, it freewheels when not in use, and being lightweight it has little effect on the characteristics of a bike. Front unlaced, fast rpm wind for small wheel builds, low rpm for regular builds

E-BikeKit™ Front 500-1000w Geared Hub Motor Conversion Kit The E-BikeKit 500-1000w geared conversion kit is powered by an internal 5:1 planetary gear hub motor with clutch. The clutch in the geared motor offers zero drag when pedaling and not engaging battery power. This motor is more efficient, resulting in increased range (especially with "start/stop" riding), has more starting torque, and has greater hill-climbing ability than a Direct-Drive motor of equal power rating. The motor is also smaller in diameter for increased stealth and 3.4lbs lighter than the 500w direct-drive. Who's it for? This kit is for anyone wanting the best of the best in performance, efficiency, weight and stealth. There is a 300lb total load limit so if you plan on more than that, look to a direct-drive motor. Conversion Kit Specs:< br/> Watts (Nominal/Peak): 500-1000w (EBK 22amp controller) Top Speed: Approx. 20 MPH @36v in 26" wheel / Approx. 28 MPH @48v in 26" wheel Range: Depends on battery capacity(AH), total load, rider input and terrain Performance: High Efficiency: High Stealth Factor: High Battery: Not Included Charger: Not Included Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese, Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND the battery is capable of 22Amp continuous discharge. The Amp Hour (AH) battery specification is an indication of a battery's capacity. A battery capacity of 10ah will typically deliver 20 miles / 32kms range. Choosing Your Wheel Size: You can find your wheel size written on your tire. Available size options for this conversion kit are: 16", 20", 24", 26", 700c & 29er. Acceptable tire widths for the E-BikeKit rims: 1.15"(29mm) - 2.25"(57mm).

DESCRIPTION MOTOR SPECS INCLUDES E-BikeKit™ Rear 500-1000w Geared Hub Motor Conversion Kit The E-BikeKit 500-1000w geared conversion kit is powered by an internal 5:1 planetary gear hub motor with clutch. The clutch in the geared motor offers zero drag when pedaling and not engaging battery power. This motor is more efficient, resulting in increased range (especially with "start/stop" riding), has more starting torque, and has greater hill-climbing ability than a Direct-Drive motor of equal power rating. The motor is also smaller in diameter for increased stealth and 3.4lbs lighter than the 500w direct-drive. Who's it for? This kit is for anyone wanting the best of the best in performance, efficiency, weight and stealth. There is a 300lb total load limit so if you plan on more than that, look to a direct-drive motor. Conversion Kit Specs: Watts (Nominal/Peak): 500-1000w (EBK 22amp controller) Top Speed: Approx. 20 MPH @36v in 26" wheel / Approx. 28 MPH @48v in 26" wheel Range: Depends on battery capacity(AH), total load, rider input and terrain Performance: High Efficiency: High Stealth Factor: High *Total load, rider input and terrain contingent. Battery: Not Included Charger: Not Included Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese, Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND the battery is capable of 22Amp continuous discharge. The Amp Hour (AH) battery specification is an indication of a battery's capacity. A battery capacity of 10ah will typically deliver 20 miles / 32kms range. Choosing Your Wheel Size: You can find your wheel size written on your tire. Available size options for this conversion kit are: 16", 20", 24", 26", 700c & 29er. Acceptable tire widths for the E-BikeKit rims: 1.15"(29mm) - 2.25"(57mm).

It’s finally here. A well engineered, quiet and compact mid-drive electric bike kit that can mount with ease on most existing bicycles. e-RAD Mid Drive kits are designed with the US market in mind. The 750 watt rated motor that can provide up to 1200+ watts of peak power. This translates into extreme hill climbing ability of grades up to 30% or more. All kits ship with a 20mph (32km/h) speed limit. For off-road use, the speed limit of the system can be adjusted in the LCD control panel. The entire kit is plug and play, with waterproof connections throughout. The kits come pre-wired to connect to e-RAD Lithium-Ion batteries but if ordered without a battery, a battery side connector is included to make it easy to connect to an existing battery. Up to 1200+ watts peak power Integrated controller with 9 IRFB3077 MOSFETs System Voltage – 48V Controller includes a dedicated cable to connect the Gear Sensor ensuring smooth shifting Waterproof Connectors throughout including battery cable Throttle and Pedal Assist Modes Throttle operation is available in all modes above 2mph (3km/h) 5 Levels of Pedal Assist Plug and Play Large LCD screen with speed, battery, real time power (watts), ambient temperature, and Assist info

It’s finally here. A well engineered, quiet and compact mid-drive electric bike kit that can mount with ease on most existing bicycles. e-RAD Mid Drive kits are designed with the US market in mind. The 750 watt rated motor that can provide up to 1200+ watts of peak power. This translates into extreme hill climbing ability of grades up to 30% or more. All kits ship with a 20mph (32km/h) speed limit. For off-road use, the speed limit of the system can be adjusted in the LCD control panel. The entire kit is plug and play, with waterproof connections throughout. The kits come pre-wired to connect to e-RAD Lithium-Ion batteries but if ordered without a battery, a battery side connector is included to make it easy to connect to an existing battery. Up to 1200+ watts peak power Integrated controller with 9 IRFB3077 MOSFETs System Voltage – 48V Controller includes a dedicated cable to connect the Gear Sensor ensuring smooth shifting Waterproof Connectors throughout including battery cable Throttle and Pedal Assist Modes Throttle operation is available in all modes above 2mph (3km/h) 5 Levels of Pedal Assist Plug and Play Large LCD screen with speed, battery, real time power (watts), ambient temperature, and Assist info

It’s finally here. A well engineered, quiet and compact mid-drive electric bike kit that can mount with ease on most existing bicycles. e-RAD Mid Drive kits are designed with the US market in mind. The 750 watt rated motor that can provide up to 1200+ watts of peak power. This translates into extreme hill climbing ability of grades up to 30% or more. All kits ship with a 20mph (32km/h) speed limit. For off-road use, the speed limit of the system can be adjusted in the LCD control panel. The entire kit is plug and play, with waterproof connections throughout. The kits come pre-wired to connect to e-RAD Lithium-Ion batteries but if ordered without a battery, a battery side connector is included to make it easy to connect to an existing battery. Up to 1200+ watts peak power Integrated controller with 9 IRFB3077 MOSFETs System Voltage – 48V Controller includes a dedicated cable to connect the Gear Sensor ensuring smooth shifting Waterproof Connectors throughout including battery cable Throttle and Pedal Assist Modes Throttle operation is available in all modes above 2mph (3km/h) 5 Levels of Pedal Assist Plug and Play Large LCD screen with speed, battery, real time power (watts), ambient temperature, and Assist info